Tips for first-time users
Tips for first-time users#
Ray provides a highly flexible, yet minimalist and easy to use API. On this page, we describe several tips that can help first-time Ray users to avoid some common mistakes that can significantly hurt the performance of their programs. For an in-depth treatment of advanced design patterns, please read core design patterns.
Initialize Ray context.
Function or class decorator specifying that the function will be
executed as a task or the class as an actor in a different process.
Postfix to every remote function, remote class declaration, or
invocation of a remote class method.
Remote operations are asynchronous.
Store object in object store, and return its ID.
This ID can be used to pass object as an argument
to any remote function or method call.
This is a synchronous operation.
Return an object or list of objects from the object ID
or list of object IDs.
This is a synchronous (i.e., blocking) operation.
From a list of object IDs, returns
(1) the list of IDs of the objects that are ready, and
(2) the list of IDs of the objects that are not ready yet.
By default, it returns one ready object ID at a time.
All the results reported in this page were obtained on a 13-inch MacBook Pro with a 2.7 GHz Core i7 CPU and 16GB of RAM.
ray.init() automatically detects the number of cores when it runs on a single machine,
to reduce the variability of the results you observe on your machine when running the code below,
here we specify num_cpus = 4, i.e., a machine with 4 CPUs.
Since each task requests by default one CPU, this setting allows us to execute up to four tasks in parallel. As a result, our Ray system consists of one driver executing the program, and up to four workers running remote tasks or actors.
Tip 1: Delay ray.get()#
With Ray, the invocation of every remote operation (e.g., task, actor method) is asynchronous. This means that the operation immediately returns a promise/future, which is essentially an identifier (ID) of the operation’s result. This is key to achieving parallelism, as it allows the driver program to launch multiple operations in parallel. To get the actual results, the programmer needs to call
ray.get() on the IDs of the results. This call blocks until the results are available. As a side effect, this operation also blocks the driver program from invoking other operations, which can hurt parallelism.
Unfortunately, it is quite natural for a new Ray user to inadvertently use
ray.get(). To illustrate this point, consider the following simple Python code which calls the
do_some_work() function four times, where each invocation takes around 1 sec:
import time def do_some_work(x): time.sleep(1) # Replace this with work you need to do. return x start = time.time() results = [do_some_work(x) for x in range(4)] print("duration =", time.time() - start) print("results = ", results)
The output of a program execution is below. As expected, the program takes around 4 seconds:
duration = 4.0149290561676025 results = [0, 1, 2, 3]
Now, let’s parallelize the above program with Ray. Some first-time users will do this by just making the function remote, i.e.,
1import time 2import ray 3 4ray.init(num_cpus = 4) # Specify this system has 4 CPUs. 5 email@example.com 7def do_some_work(x): 8 time.sleep(1) # Replace this with work you need to do. 9 return x 10 11start = time.time() 12results = [do_some_work.remote(x) for x in range(4)] 13print("duration =", time.time() - start) 14print("results = ", results)
However, when executing the above program one gets:
duration = 0.0003619194030761719 results = [ObjectRef(df5a1a828c9685d3ffffffff0100000001000000), ObjectRef(cb230a572350ff44ffffffff0100000001000000), ObjectRef(7bbd90284b71e599ffffffff0100000001000000), ObjectRef(bd37d2621480fc7dffffffff0100000001000000)]
When looking at this output, two things jump out. First, the program finishes immediately, i.e., in less than 1 ms. Second, instead of the expected results (i.e., [0, 1, 2, 3]), we get a bunch of identifiers. Recall that remote operations are asynchronous and they return futures (i.e., object IDs) instead of the results themselves. This is exactly what we see here. We measure only the time it takes to invoke the tasks, not their running times, and we get the IDs of the results corresponding to the four tasks.
To get the actual results, we need to use ray.get(), and here the first instinct is to just call
ray.get() on the remote operation invocation, i.e., replace line 12 with:
results = [ray.get(do_some_work.remote(x)) for x in range(4)]
By re-running the program after this change we get:
duration = 4.018050909042358 results = [0, 1, 2, 3]
So now the results are correct, but it still takes 4 seconds, so no speedup! What’s going on? The observant reader will already have the answer:
ray.get() is blocking so calling it after each remote operation means that we wait for that operation to complete, which essentially means that we execute one operation at a time, hence no parallelism!
To enable parallelism, we need to call
ray.get() after invoking all tasks. We can easily do so in our example by replacing line 12 with:
results = ray.get([do_some_work.remote(x) for x in range(4)])
By re-running the program after this change we now get:
duration = 1.0064549446105957 results = [0, 1, 2, 3]
So finally, success! Our Ray program now runs in just 1 second which means that all invocations of
do_some_work() are running in parallel.
In summary, always keep in mind that
ray.get() is a blocking operation, and thus if called eagerly it can hurt the parallelism. Instead, you should try to write your program such that
ray.get() is called as late as possible.
Tip 2: Avoid tiny tasks#
When a first-time developer wants to parallelize their code with Ray, the natural instinct is to make every function or class remote. Unfortunately, this can lead to undesirable consequences; if the tasks are very small, the Ray program can take longer than the equivalent Python program.
Let’s consider again the above examples, but this time we make the tasks much shorter (i.e, each takes just 0.1ms), and dramatically increase the number of task invocations to 100,000.
import time def tiny_work(x): time.sleep(0.0001) # Replace this with work you need to do. return x start = time.time() results = [tiny_work(x) for x in range(100000)] print("duration =", time.time() - start)
By running this program we get:
duration = 13.36544418334961
This result should be expected since the lower bound of executing 100,000 tasks that take 0.1ms each is 10s, to which we need to add other overheads such as function calls, etc.
Let’s now parallelize this code using Ray, by making every invocation of
import time import ray ray.init(num_cpus = 4) @ray.remote def tiny_work(x): time.sleep(0.0001) # Replace this with work you need to do. return x start = time.time() result_ids = [tiny_work.remote(x) for x in range(100000)] results = ray.get(result_ids) print("duration =", time.time() - start)
The result of running this code is:
duration = 27.46447515487671
Surprisingly, not only Ray didn’t improve the execution time, but the Ray program is actually slower than the sequential program! What’s going on? Well, the issue here is that every task invocation has a non-trivial overhead (e.g., scheduling, inter-process communication, updating the system state) and this overhead dominates the actual time it takes to execute the task.
One way to speed up this program is to make the remote tasks larger in order to amortize the invocation overhead. Here is one possible solution where we aggregate 1000
tiny_work() function calls in a single bigger remote function:
import time import ray ray.init(num_cpus = 4) def tiny_work(x): time.sleep(0.0001) # replace this is with work you need to do return x @ray.remote def mega_work(start, end): return [tiny_work(x) for x in range(start, end)] start = time.time() result_ids =  [result_ids.append(mega_work.remote(x*1000, (x+1)*1000)) for x in range(100)] results = ray.get(result_ids) print("duration =", time.time() - start)
Now, if we run the above program we get:
duration = 3.2539820671081543
This is approximately one fourth of the sequential execution, in line with our expectations (recall, we can run four tasks in parallel). Of course, the natural question is how large is large enough for a task to amortize the remote invocation overhead. One way to find this is to run the following simple program to estimate the per-task invocation overhead:
@ray.remote def no_work(x): return x start = time.time() num_calls = 1000 [ray.get(no_work.remote(x)) for x in range(num_calls)] print("per task overhead (ms) =", (time.time() - start)*1000/num_calls)
Running the above program on a 2018 MacBook Pro notebook shows:
per task overhead (ms) = 0.4739549160003662
In other words, it takes almost half a millisecond to execute an empty task. This suggests that we will need to make sure a task takes at least a few milliseconds to amortize the invocation overhead. One caveat is that the per-task overhead will vary from machine to machine, and between tasks that run on the same machine versus remotely. This being said, making sure that tasks take at least a few milliseconds is a good rule of thumb when developing Ray programs.
Tip 3: Avoid passing same object repeatedly to remote tasks#
When we pass a large object as an argument to a remote function, Ray calls
ray.put() under the hood to store that object in the local object store. This can significantly improve the performance of a remote task invocation when the remote task is executed locally, as all local tasks share the object store.
However, there are cases when automatically calling
ray.put() on a task invocation leads to performance issues. One example is passing the same large object as an argument repeatedly, as illustrated by the program below:
import time import numpy as np import ray ray.init(num_cpus = 4) @ray.remote def no_work(a): return start = time.time() a = np.zeros((5000, 5000)) result_ids = [no_work.remote(a) for x in range(10)] results = ray.get(result_ids) print("duration =", time.time() - start)
This program outputs:
duration = 1.0837509632110596
This running time is quite large for a program that calls just 10 remote tasks that do nothing. The reason for this unexpected high running time is that each time we invoke
no_work(a), Ray calls
ray.put(a) which results in copying array
a to the object store. Since array
a has 2.5 million entries, copying it takes a non-trivial time.
To avoid copying array
a every time
no_work() is invoked, one simple solution is to explicitly call
ray.put(a), and then pass
a’s ID to
no_work(), as illustrated below:
import time import numpy as np import ray ray.init(num_cpus = 4) @ray.remote def no_work(a): return start = time.time() a_id = ray.put(np.zeros((5000, 5000))) result_ids = [no_work.remote(a_id) for x in range(10)] results = ray.get(result_ids) print("duration =", time.time() - start)
Running this program takes only:
duration = 0.132796049118042
This is 7 times faster than the original program which is to be expected since the main overhead of invoking
no_work(a) was copying the array
a to the object store, which now happens only once.
Arguably a more important advantage of avoiding multiple copies of the same object to the object store is that it precludes the object store filling up prematurely and incur the cost of object eviction.
Tip 4: Pipeline data processing#
If we use
ray.get() on the results of multiple tasks we will have to wait until the last one of these tasks finishes. This can be an issue if tasks take widely different amounts of time.
To illustrate this issue, consider the following example where we run four
do_some_work() tasks in parallel, with each task taking a time uniformly distributed between 0 and 4 seconds. Next, assume the results of these tasks are processed by
process_results(), which takes 1 sec per result. The expected running time is then (1) the time it takes to execute the slowest of the
do_some_work() tasks, plus (2) 4 seconds which is the time it takes to execute
import time import random import ray ray.init(num_cpus = 4) @ray.remote def do_some_work(x): time.sleep(random.uniform(0, 4)) # Replace this with work you need to do. return x def process_results(results): sum = 0 for x in results: time.sleep(1) # Replace this with some processing code. sum += x return sum start = time.time() data_list = ray.get([do_some_work.remote(x) for x in range(4)]) sum = process_results(data_list) print("duration =", time.time() - start, "\nresult = ", sum)
The output of the program shows that it takes close to 8 sec to run:
duration = 7.82636022567749 result = 6
Waiting for the last task to finish when the others tasks might have finished much earlier unnecessarily increases the program running time. A better solution would be to process the data as soon it becomes available.
Fortunately, Ray allows you to do exactly this by calling
ray.wait() on a list of object IDs. Without specifying any other parameters, this function returns as soon as an object in its argument list is ready. This call has two returns: (1) the ID of the ready object, and (2) the list containing the IDs of the objects not ready yet. The modified program is below. Note that one change we need to do is to replace
process_incremental() that processes one result at a time.
import time import random import ray ray.init(num_cpus = 4) @ray.remote def do_some_work(x): time.sleep(random.uniform(0, 4)) # Replace this with work you need to do. return x def process_incremental(sum, result): time.sleep(1) # Replace this with some processing code. return sum + result start = time.time() result_ids = [do_some_work.remote(x) for x in range(4)] sum = 0 while len(result_ids): done_id, result_ids = ray.wait(result_ids) sum = process_incremental(sum, ray.get(done_id)) print("duration =", time.time() - start, "\nresult = ", sum)
This program now takes just a bit over 4.8sec, a significant improvement:
duration = 4.852453231811523 result = 6
To aid the intuition, Figure 1 shows the execution timeline in both cases: when using
ray.get() to wait for all results to become available before processing them, and using
ray.wait() to start processing the results as soon as they become available.