Best practices for deploying large clusters¶

This section aims to document best practices for deploying Ray clusters at large scale.

Networking configuration¶

End users should only need to directly interact with the head node of the cluster. In particular, there are 2 services which should be exposed to users:

  1. The dashboard

  2. The Ray client server

Note

While users only need 2 ports to connect to a cluster, the nodes within a cluster require a much wider range of ports to communicate.

See Ray port configuration for a comprehensive list.

Applications (such as Ray Serve) may also require additional ports to work properly.

System configuration¶

There are a few system level configurations that should be set when using Ray at a large scale.

  • Make sure ulimit -n is set to at least 65535. Ray opens many direct connections between worker processes to avoid bottlenecks, so it can quickly use a large number of file descriptors.

  • Make sure /dev/shm is sufficiently large. Most ML/RL applications rely heavily on the plasma store. By default, Ray will try to use /dev/shm for the object store, but if it is not large enough (i.e. --object-store-memory > size of /dev/shm), Ray will write the plasma store to disk instead, which may cause significant performance problems.

  • Use NVMe SSDs (or other high perforfmance storage) if possible. If object spilling is enabled Ray will spill objects to disk if necessary. This is most commonly needed for data processing workloads.

Configuring the head node¶

In addition to the above changes, when deploying a large cluster, Ray’s architecture means that the head node will have extra stress due to GCS.

  • Make sure the head node has sufficient bandwidth. The most heavily stressed resource on the head node is outbound bandwidth. For large clusters (see the scalability envelope), we recommend using machines networking characteristics at least as good as an r5dn.16xlarge on AWS EC2.

  • Set resources: {"CPU": 0} on the head node. (For Ray clusters deployed using Helm, set rayResources: {"CPU": 0}.) Due to the heavy networking load (and the GCS and dashboard processes), we recommend setting the number of CPUs to 0 on the head node to avoid scheduling additional tasks on it.

Configuring the autoscaler¶

For large, long running clusters, there are a few parameters that can be tuned.

  • Ensure your quotas for node types are set correctly.

  • For long running clusters, set the AUTOSCALER_MAX_NUM_FAILURES environment variable to a large number (or inf) to avoid unexpected autoscaler crashes. The variable can be set by prepending export AUTOSCALER_MAX_NUM_FAILURES=inf; to the head node’s Ray start command. (Note: you may want a separate mechanism to detect if the autoscaler errors too often).

  • For large clusters, consider tuning upscaling_speed for faster autoscaling.

Picking nodes¶

Here are some tips for how to set your available_node_types for a cluster, using AWS instance types as a concrete example.

General recommendations with AWS instance types:

When to use GPUs

  • If you’re using some RL/ML framework

  • You’re doing something with tensorflow/pytorch/jax (some framework that can leverage GPUs well)

What type of GPU?

  • The latest gen GPU is almost always the best bang for your buck (p3 > p2, g4 > g3), for most well designed applications the performance outweighs the price (the instance price may be higher, but you’ll use the instance for less time.

  • You may want to consider using older instances if you’re doing dev work and won’t actually fully utilize the GPUs though.

  • If you’re doing training (ML or RL), you should use a P instance. If you’re doing inference, you should use a G instance. The difference is processing:VRAM ratio (training requires more memory).

What type of CPU?

  • Again stick to the latest generation, they’re typically cheaper and faster.

  • When in doubt use M instances, they have typically have the highest availability.

  • If you know your application is memory intensive (memory utilization is full, but cpu is not), go with an R instance

  • If you know your application is CPU intensive go with a C instance

  • If you have a big cluster, make the head node an instance with an n (r5dn or c5n)

How many CPUs/GPUs?

  • Focus on your CPU:GPU ratio first and look at the utilization (Ray dashboard should help with this). If your CPU utilization is low add GPUs, or vice versa.

  • The exact ratio will be very dependent on your workload.

  • Once you find a good ratio, you should be able to scale up and and keep the same ratio.

  • You can’t infinitely scale forever. Eventually, as you add more machines your performance improvements will become sub-linear/not worth it. There may not be a good one-size fits all strategy at this point.

Note

If you’re using RLlib, check out the RLlib scaling guide for RLlib specific recommendations.